To Set Sectioning Options
1. Click > . The Creo Illustrate Options dialog box opens.
2. Next to Showing, select Illustration or Current Figure.
3. On the left, under Model, select Sectioning. The Model -Sectioning options open on the right.
4. To set the level of precision for sectioning, select or clear the Use high level section detailing check box.
5. To set the default sectioning behavior, under Behavior, select or clear any of the following check boxes:
◦ Hide construction geometry while sectioning
◦ Hide all parts while sectioning
◦ Cap Sections
▪ Use single color for section cap and then select a color.
|
|
Capped sections will also be applied to 2D figures.
|
◦ Show Boundaries
6. To adjust the Preset Sections, choose the Viewing direction for each of the three axis presets. You can also select which of the three is used as the Default axis.
7. To outline the cut edges in a single color, select the Use single color for section lines check box and select a color.
8. Click Apply to apply the changes and keep the dialog box open, or click OK to apply the changes and close the dialog box.
