To Adjust Datum Display by Reference
You can size datum planes to visually fit a part, feature, surface, edge, axis, or radius.
1. Right-click the datum plane in the Model Tree or graphics window and choose
Edit Definition from the shortcut menu. The
Datum Plane dialog box opens.
| You can also adjust the size of the datum plane during the creation of the datum plane. |
2. Click the Display tab.
3. Select the Adjust outline check box.
4. Select Reference in the box to size the datum plane to a selected reference.
| To select a feature as the reference, set up the selection filter to exclusively select features and filter out datum coordinate systems and datum point features that include single points. |
5. Click the reference collector, and then select a part, feature, edge, axis, or surface as a size reference.
6. Click OK.