Creo™ Schematics 4.0 Help Center > Working with Designs > Wiring > Cables > To Route a Predefined Cable on Selected Ports
  
To Route a Predefined Cable on Selected Ports
1. Select the ports to route. The ports can be on more than two connectors.
* 
One cable end must be routed from a single connector to ensure that the number of automatically drawn cores will equal the number of ports selected.
2. Click Diagramming > Route > and select a cable from the Catalog Selector.
3. Click OK. The cable is automatically created and cable decorations are applied.
* 
The number of cores created is always the same as the number of port pairs connected. Any remaining cores are created as shapeless spares, viewable in the Model Explorer or in a report.