Creo™ Schematics 4.0 Help Center > Design Basics > Working with an Internal Catalog > Fibers > To Define a Cross Sheet Portshape for Fibers
  
To Define a Cross Sheet Portshape for Fibers
Creating a Cross Sheet Portshape for a Design
1. Create a new portshape.
2. Create a label for the shape using the Cross reference function.
3. Close the shape.
Defining a Cross Sheet Portshape for a Design
1. Click Design > Design Properties. The Design Properties dialog box opens.
2. Click Cross Sheet Graphics. The Cross-sheet Graphics dialog box opens.
3. Select the Diagram type from the list.
4. To set Fibers cross-sheet graphic, click next to the box. The Catalog Selector dialog box opens.
5. Select a port and click OK.
6. To set Highways, cross-sheet graphic click next to the box. The Catalog Selector dialog box opens.
7. Select a poet and click OK.
8. From the Portshapes list, select the portshape to use with the cross-sheet fiber and click OK.
9. Click OK.
Defining a Cross Sheet Portshape for an Individual Fiber
1. Route the fiber to the desired location.
2. Right click and choose Select cross sheet graphics from the shortcut menu. The Catalog Selector opens.
3. From the Portshapes list, select the portshape to use with the cross sheet fiber and click OK.