Welding Design > Creating Materials, Processes, Preferences, and Parameters > Welding Parameters > Welding Measurement Parameters > To Delete Welding Measurement Parameters
  
To Delete Welding Measurement Parameters
To delete a measurement parameter from a model, you must first change the parameter type from Measure to Real by deleting the measurement property from the parameter, and then delete the parameter from the model.
You can delete a welding measurement parameter using the Parameters dialog box or the Parameter Properties dialog box.
1. Open the Parameters dialog box by doing one of the following actions:
Click Tools > Parameters.
From the Fillet Weld, Groove Weld, Butt Weld, Plug/Slot Weld, or Spot Weld tab, click the Properties tab, and then click Define next to Feature Parameters.
Right-click a welding feature in the Model Tree or graphics window and choose Parameters from the shortcut menu.
2. Select a parameter of the type Measure.
3. Perform one of the following actions:
Right-click and choose Delete Measure.
Click Properties. The Parameter Properties dialog box opens. Under Measure, click Delete.
The parameter type changes to Real, and access changes to Full.
4. Click OK.