Creo Tutorials > Creo Flow Analysis Tutorials > Beginners Tutorials > Tutorials > Tutorial 1 - Without Heat Transfer: Power Inverter > Without Heat Transfer: Power Inverter Exercise 7—Analyzing Results
  
Without Heat Transfer: Power Inverter Exercise 7—Analyzing Results
This exercise describes how you analyze the results during and after the simulation. To hide CAD surfaces (not the fluid domain), switch between CAD Bodies and Flow Analysis Bodies in the Show group.
Viewing the Pressure Contours on a Boundary
Pressure: [Pa] : Flow
101325.0
101314.0
1. In Boundary Conditions, under General Boundaries select POWERINVERTER_1_FLUID.
2. In the Properties panel, View tab, for Surface, set values for the options as listed below:
SurfaceYes
GridNo
OutlineNo
VariablePressure: [Pa] : Flow
Min—101314.0
Max—101325.0
3. Click in the Graphics toolbar to display the style elements. Select Shading.
Viewing Vectors on a Section
Pressure: [Pa] : Flow
101325.0
101314.75
1. Create a section.
2. Select Section 01.
3. In the Properties panel, Model tab, set values for the options as listed below:
TypePlane Y
Position—0.006
4. In the Properties panel, View tab, for Surface, set values for the options as listed below:
VariablePressure: [Pa] : Flow
Min—101314.75
Max—101325
5. In the Properties panel, View tab, for Vector, set VariableVelocity: [m/s] : Flow
6. You can edit vector properties using the Size,Uniform Head, Head Size and Projection options.
7. In Boundary Conditions, under General Boundaries select POWERINVERTER_1_FLUID.
8. In the Functions panel click Turn on/off view properties and select the following from the list: Hide all surfaces, Hide all grids, and Hide all outlines.
9. Select Section 01. The vectors of this section appear.
Viewing the Streamlines in the Domain
Velocity Magnitude: [m/s] : Flow
2.321
0.0
1. Add Streamline01 to the Flow Analysis Tree and select it.
2. In the Properties panel, Model tab, set values for the options as listed below:
Line Thickness—0.0005
Animation Time Size—0.005
3. In the Properties panel, View tab, for Surface, set values for the options as listed below:
VariableVelocity Magnitude: [m/s] : Flow
Min—0
Max—2.321
4. In the Flow Analysis Tree, under General Boundaries select BC_1.
5. In the Properties panel, for Streamline01 set Release Particle to Yes.
Plotting the Mass Flux at the Outlet Boundary
1. In the Flow Analysis Tree, under Boundary Conditions click General Boundaries.
2. Select BC_2.
3. Click XYPlot. A new entity xyplot1 is added in the Flow Analysis Tree under Results > Derived Surfaces > XY Plots.
4. Select xyplot1.
5. In the Properties panel, Model tab, set the Variable as Mass Flux.
6. Click Stop and Run, if required.
Plotting the Pressure at Monitoring Point
1. In the Flow Analysis Tree, under Results click Monitoring Points.
2. Select Point01.
3. Click XYPlot. A new entity xyplot2 is added in the Flow Analysis Tree under Results > Derived Surfaces > XY Plots.
4. Select xyplot2.
5. In the Properties panel, set VariablePressure
6. Click Stop and Run, if required.