Creating High Speed Rest Finish Sequence
1. Click Mill > HSM Rest Finish. The HSM Rest Finish tab opens.
2. Click
and select
6X3 BALL_MILL tool with a cutter diameter of 6 mm.
3. On the References tab, click the Mill window collector and on the Model Tree, select Mill Window 1. By default, the 10X5 tool is selected as Reference Cutting Tool.
4. On the Parameters tab, the parameters are populated automatically, based on the tool diameter. To optimize the toolpath, set values as shown for the following parameters:
◦ FEED_UNITS = MMPM
◦ FINISH_STOCK_ALLOW = 0
◦ STEP_OVER = 0.2
◦ FINISH_OPTION = CONSTANT_CUSP
◦ SPINDLE_SPEED = 8500
5. Click the arrow next to
and then click
. The
Material Removal tab opens.
6. On the Material Removal tab, click Stock Model > Open In-Process Stock. The Load stock dialog box opens.
7. Select hsm-finish.bin and click Open.
8. Click
to open the
Play Simulation dialog box.
9. Click
to play simulation.
10. On the
Material Removal tab, click
and then on the
HSM Rest Finish tab, click
OK to complete the sequence.
