Creo Simulate > Modeling Structure and Thermal Problems > Structural Constraints > Displacement Constraints > Constraint Options
  
Constraint Options
The following table shows which constraint options are available for each model type in a Cartesian coordinate system:
Model Type
Constraint Options
3D
Trans X, Trans Y, Trans Z, Rot X, Rot Y, Rot Z
plane strain and 2D axisymmetric
Trans X, Trans Y, Rot Z
plane stress
Trans X, Trans Y
 
* The software ignores any rotational degrees of freedom for 2D solids or solids in 3D models. If you specify constraints on Rot X, Rot Y, or Rot Z for these elements, the software ignores the constraints.
The software labels the coordinate directions differently if a cylindrical or spherical coordinate system is active. The following table shows the constraint options for each coordinate system (R=radial, T=theta, and P=phi):
Cartesian
Cylindrical
Spherical
Trans X
Trans R
Trans R
Trans Y
Trans T
Trans T
Trans Z
Trans Z
Trans P
Rot X
Rot R
Rot R
Rot Y
Rot T
Rot T
Rot Z
Rot Z
Rot P
For more information about coordinate systems, see Coordinate Systems.
Return to Displacement Constraints.