To Create a Planar Wall
1. Click
Model >
Planar. The
Planar tab opens.
2. Click References. The References tab opens.
3. Click Define. The Sketch dialog box opens. Select sketch references and click Sketch.
|  When you are using an external sketch, click Unlink to break the association between the sketch feature and the wall sketch. For more information about external sketches, search the Help Center. |
4. Create a closed loop sketch and click
OK to accept the sketch.
5. Type a value for the wall thickness or accept the default value. You can set thickness only for the first planar wall, which sets the thickness for all other walls.
6. To flip the wall thickness, click
.
7. To flip the driving surface, click Options. The Options tab opens. Select Set driving surface opposite sketch plane.
| The driving surface cannot be flipped for a first planar wall. |
8. Click
.