Creo NC Sheetmetal > Machine Zones and Clamps > Creating Clamps
  
Creating Clamps
A clamp section may consist of only a single closed loop of sketched entities. Its location is defined as X and Y offsets from the machine zone origin. You can also specify a rotation angle.
There are two valid types of clamps: Machine Clamp, and Reposition Pad. Use machine clamps to calculate avoidance and reposition clamps for visualization purposes.
The Zones drop-down menu contains the following options:
Create—Create the machine zones.
Modify—Modify the selected clamp.
Delete—Delete all the machine zones.