Piping > Manufacturing > Pipe Fabrication > Cutting Pipe Pieces > To Delete a Pipe Piece Cut
  
To Delete a Pipe Piece Cut
Use this procedure to delete a single pipe cut piece or to delete all cuts on a single segment, overall pipe run, entire pipeline, or in a block.
1. Click the arrow next to Cut.
2. Click Delete Cut. The Delete Cut dialog box opens.
3. Based on the location of the cuts to be deleted, do one of the following:
Select Selected cut to delete only the selected cut. The name of the selected cut location is displayed under Select pipe cut.
Select All cuts in pipe segment to delete the cuts on a pipe segment. The pipeline label of the selected pipe segment and the pipe segments' ID are displayed under Select pipe segment.
Select All cuts in pipe run to delete all the cuts existing on an pipe run. The pipeline label of the selected pipe segment and the pipe segments' ID are displayed under Select pipe segment.
The pipe run includes all pipe segments between two consecutive free ends along a straight line, or a free end and a corner, or a corner and a free end, or a corner and another corner of a pipeline.
Select All cuts at block boundary to delete all the pipe cuts on the boundaries of the selected block. Under Select block name, select a block name from the list.
Select All cuts on pipeline to delete the cuts in a pipeline. Select any pipe segment on the pipeline whose cuts are to be deleted. The pipeline label of the selected pipe segment is displayed under Select pipeline.
4. To delete the selected cuts, do one of the following:
Click OK to delete all the selected cuts and close the Delete Cut dialog box.
Click Apply to delete the selected cuts. The pipeline automatically repaints with the cut deleted and the Delete Cut dialog box remains open for further cuts, if any.