Piping > Routing > Routing in Non Spec-Driven Piping Mode > Routing Techniques
  
Routing Techniques
You can route a new line or an existing line using one of the following techniques:
Create a pipe segment by routing it from the current start point to a selected point or entry port. You can select multiple points through which to route. If necessary, set a start point first.
Create a new pipe segment by extending in the specified direction or up to specified geometry. If necessary, set a start point first.
Connect entry ports or individual unconnected segments of the same pipeline.
Create a segment that taps into a pipeline at a specified point.
Create a pipeline by following an axis, cylinder, existing pipeline, or sketched geometry (this functionality is not available for flexible pipes).