Piping > Design Rule Checking and Piping (Report) Information > Spec-Driven Pipeline Reporting > Spec-Driven Designatable Pipe Reporting > Example: Bend Machine Report
  
Example: Bend Machine Report
The pipe bend machine report for the selected pipeline is stored in your working directory as a text file named bend_mach.dat in the following format:
Bend Machine Information
========================
Bend #
Offset
Twist Angle
Bend Angle
Bend Radius
-----------
-----------
-----------
-----------
-----------
1
935.39
90.00
560.00
2
8980.00
180.00
90.00
560.00
3
1374.00
90.37
90.00
560.00
4
5158.41
Information about designated reports is stored in the piping assembly. You can access this information by using the report table repeat region functionality in the Drawing mode. The following table maps the entities in the report with their corresponding parameters:
Entity
Parameter
Bend #
&asm.mbr.pipe.segment.mach_csys.bend.mach_num
Offset
&asm.mbr.pipe.segment.mach_csys.bend.mach_offset
Twist Angle
&asm.mbr.pipe.segment.mach_csys.bend.mach_twist
Bend Angle
&asm.mbr.pipe.segment.mach_csys.bend.mach_bend
Bend Radius
&asm.mbr.pipe.segment.mach_csys.bend.mach_radius