Piping > Tutorials > Exercise 4—Inserting Fittings in Spec-Driven Piping > Specification Override during Fitting Insertion
  
Specification Override during Fitting Insertion
Use the sample files provided at <Creo load point>\Common Files\help\sample_models\piping when working in this exercise. It is recommended that you create a copy of the piping folder on your computer and set up piping data before you start working with the tutorial.
Create a Pipe Segment
1. On the Home tab, click New. The New dialog box opens.
2. Under Type, select Assembly.
3. Click OK to create a new assembly.
4. Click Applications > Piping. The Piping tab opens.
5. On the Piping tab, select the Spec Driven check box.
6. Click Create Pipe. The Create Pipeline dialog box opens.
7. In the Size box, select 100A.
8. In the Number box, type 1.
9. Click OK. The Create Pipeline dialog box closes.
10. Click Set Start. The Define Start dialog box opens.
11. Select ASM_DEF_CSYS in the graphics window.
12. Click OK. The Define Start dialog box closes.
13. Click Extend. The Extend dialog box opens.
14. In the z box, type 1000 and press ENTER.
15. Click OK. A pipe segment is created.
Insert a Fitting
1. Click Insert Fitting. The Insert Fitting dialog box opens.
2. Select the pipe segment in the graphics window.
3. Select the Specification check box and select ha.
4. Click OK. A fitting is inserted.
5. Click Piping Info. The Report Pipeline dialog box opens.
6. Under Type, click to display the fitting report.
7. Select a fitting component in the graphics window and click OK in the Select dialog box. The INFORMATION WINDOW opens.
 
* The INFORMATION WINDOW displays the values of Pipe Spec and Fitting Spec as defined.
8. Close the INFORMATION WINDOW and the Report Pipeline dialog box.