About a Revolved Cut
Use the Revolve tool to remove material by revolving a sketched section around a centerline.
• To create a cut, use the same angle options as for protrusions.
• For solid cuts, use closed sections.
• For cuts created with
![](../../../part_modeling/part_modeling/images/pfui_thin.png)
Thicken, you can use both closed and open sections.
• While defining a cut, you can switch between feature attributes by clicking the following buttons:
◦ ![](../../../part_modeling/part_modeling/images/extrev_cut.png)
Remove Material—Switches between cut and protrusion.
◦ ![](../../../part_modeling/part_modeling/images/extrev_flip.png)
Flip—Switches the side from which material is removed.
◦ ![](../../../part_modeling/part_modeling/images/pfui_thin.png)
Thicken Sketch—Switches between solid and thin cut.