Part Modeling > Engineering Features > Round > Piece Management > To Trim Round Geometry
  
To Trim Round Geometry
1. Select the references for the round and click Model > Round. The Round tab opens and round preview geometry appears.
2. Open the Pieces tab and select the round piece to trim in the Pieces table. Handles appear on the piece ends.
 
* If you have a closed-loop round set, you need to open it by removing a patch. After you select the piece to trim, select a patch from the graphics window. The patch is removed, and handles appear.
3. Drag a handle up to the patch where you want to trim the round piece. The round piece is trimmed. Notice that Edited appears in the Pieces table for the selected piece. Repeat the process if needed.
4. To trim another round piece, repeat step 2 and step 3.
5. To restore the trimmed round piece to its original state, select Included from the Pieces table or on the Pieces tab shortcut menu.
6. The trimmed round piece is complete. Close the Pieces tab to activate Sets mode and continue to work with rounds.
7. When completed, click .
 
If you trimmed multiple pieces in the current round set and want to quickly restore all of them to their original state, select All included from Pieces tab shortcut menu.
To quickly locate a piece on your model, place your cursor over each piece in the Pieces table, and it is dynamically highlighted it in the graphics window.