To Create a Chordal Round
1. Click
Model >
Round. The
Round tab opens.
2. To select references for the round, select an edge, two surfaces, or an edge and a surface.
3. To create a chordal round, on the Sets tab, click Chordal.
4. To set the chord length, drag the chord handles, or type a value on the Round tab.
5. To define the round cross section, select one of the following shapes on the Sets tab:
◦ Circular
◦ Conic. To set the sharpness of the round, drag the conic handle or type a value from 0.05 and 0.95 in the Conic Parameter box on the Round tab.
◦ C2 Continuous. To set the sharpness of the round, drag the shape handle or type a value from 0.05 and 0.95 in the C2 Shape Factor box on the Round tab.
6. To create the chordal round normal to a spine, on the Sets tab, select Normal to spine from the list.
◦ If the round uses two surfaces as references, click the Spine collector, and select an edge as the reference for the spine.
◦ If the round uses an edge or edges as references, the edges that you select are used as the reference for the spine.
7. Click
.