Part Modeling > Sections in Sketch-based Features > About the Sketch Dialog Box
  
About the Sketch Dialog Box
Click Model > Sketch to open the Sketch dialog box and shortcut menus.
Sketch Dialog Box
The Sketch dialog box contains the following tabs:
Placement
Plane reference collector—Displays the sketch plane reference.
Use Previous button—Uses the sketch plane and orientation settings of the last created sketch.
Flip button—Toggles the sketch orientation between the two sides of the sketch plane.
Reference collector—Displays a plane normal to the sketch plane to orient the view of the sketch plane to the computer screen normal axis.
Orientation list—Orients the direction the reference plane faces to the Right, Left, Top, or Bottom.
Properties
Name box—Sets a name for a feature.
—Displays detailed component information in a browser.
Add cross-hatching check box—Displays cross hatching for closed sections.
Scale—Sets the scale for the cross hatching.
Angle—Sets the angle for the cross hatch lines.
Shortcut Menus
Right-click the graphics window when the Sketch tab is open to access shortcut menu commands.  The commands available depend on the type of entity selected.
Delete
Copy
Cut
Paste
Construction
Properties
Lock or Unlock
Move & Resize
Horizontal
Vertical
Perpendicular
Parallel
Coincident
Midpoint
Tangent
Equal
Geometry
When no entity is selected, the following commands are available:
Hide entity locks or
Show entity locks
References
Line
Rectangle
Circle
3-Point / Tangent End
Centerline
Fillet
Dimension
Section Orientation > Set horizontal reference
Section Orientation > Set vertical reference
Section Orientation > Restore section orientation
Section Orientation > Flip section orientation
Section Orientation > Flip sketching plane