To Set or Modify NC Sequence Parameters
1. Click
![](../../manufacturing/nc/images/manuparam.png)
on the
Parameters tab. The
Edit Parameters dialog box opens. This dialog box contains the parameters table, which lists all the parameters that are visible at the NC sequence level.
2. To display parameters that belong to a particular category only, choose the appropriate category from the Category drop-down menu.
3. Click Tools > Parameter Columns to open the Column Setup Builder dialog box, which has options to add or remove columns, rearrange columns, and set the default width of the columns in the parameters table.
4. Each column of the parameter table displays a property of the parameter as explained below. These properties can be modified in the Parameters Setup dialog box only.
◦ Comments—Comment for the parameter.
◦ Parameter ID—Name used to represent the parameter in relations.
◦ PPRINT—Depending on whether the option is on or off, specifies whether the parameter should be included in the CL Data output. The output format is as follows:
TEXT / ‘<parameter_name>:<parameter_value>’
5. Type the value of the parameter in the Value column of the parameters table. For required parameters, this cell is highlighted in light yellow color. If you enter an invalid value, a warning message is displayed and the previous value of the parameter is restored.
For parameters that accept string values, this field turns into a drop-down menu with the allowable values. Select the appropriate value.
6. Click
![](../../manufacturing/nc/images/relations.png)
to open the
Relations dialog box and modify relations. By default, the relations are predefined for the required parameters. You can edit these default relations.
7. To sort parameters by their names or values, click the corresponding column header. Click the column header again to sort in descending order. Alternatively, click an option from the Tools > Sort Parameters menu.
8. Click Show Details to view the graphical illustration of the selected parameter. The illustration is displayed for basic parameters only. If the parameter has a predefined set of values, the graphical illustration corresponding to the specified value is displayed. For example, the following graphic is displayed when you select the RETRACT_FEED parameter:
| • The graphical illustration represents the operation for which the parameter is used. • The location of the parameter in the graphic is highlighted. |
9. Click Hide Details to hide the graphical illustration.
10. To save the parameters and their values to disk, click File > Save As and enter a file name.
11. Using the following options on the File menu, you can save parameters and their values to the disk or retrieve the stored parameters from the disk:
◦ Save As—Saves the parameters and their values to disk. Enter a file name in the dialog box that appears. The file is saved with one of the following extensions based on the type of NC sequence:
.mil—Milling NC sequences
.trn—Turning NC sequences
.drl—Holemaking NC sequences
.edm—Wire EDM NC sequences
.aux—Auxiliary NC sequences
◦ Open—Retrieves saved parameters and values from another NC sequence. In the File Open dialog box that appears, specify the file containing saved parameters.
◦ Open Site—Retrieves saved parameters from a site file. You must click File > Open and specify the site file in the Open dialog box that appears.
12. Using the following options on the Edit menu, you can :
◦ Copy—Copies currently selected cell or cells in the parameters table. You can then paste the copied values to a different cell or cells.
◦ Paste—Pastes copied values to the selected cell or cells.
◦ Copy From Tool—Contains options to copy tool parameters to the NC sequence. Click the relevant option.
◦ Inherit From Site—Lists sites defined for the manufacturing model that is valid for the current sequence. Select a site to copy site parameters defined for the current workcell. Click None so that the parameters from the site file are not copied to the parameter table.
◦ Copy from Step—Copies parameters from a previously defined step in the current NC Model.
13. Click Edit > Search to open the Search dialog box which contains options to search for a parameter.
14. Click Information > Step to open the INFORMATION WINDOW dialog box, that displays all information about the current NC step.
15. Click Tools > Relations to open the Relations dialog box and modify relations.
16. Click Tools > Parameter Columns to open the Column Setup Builder dialog box that has options to add or remove columns to the parameters table.
17. Click Tools > Show All Value Columns Columns to display all the columns in the parameters table.
18. Click OK to save all changes and close the dialog box. This option is available only after you provided the values for all the required parameters.
19. Click Cancel to discard all changes and close the dialog box. Alternatively click File > Exit.