Manufacturing > Holemaking > Axes Set > To Select Holes by Surfaces
  
To Select Holes by Surfaces
1. You can include holes on a surface in one of the following ways:
On the References tab, click in the Holes collector and select a surface to include all holes on the surface.
Select the surface when the Holes collector on the Reference tab is active. All holes on that surface are selected for drilling.
Click Rule: surfaces in the Holes dialog box and select a surface to include all holes on the selected surface.
2. To remove all holes located on a surface, select its name in the collector and click Remove.
Example
The following example shows all holes on a selected surface.
1. Select this surface
2. Retract plane