Manufacturing > Wire EDM > To Create a 4-Axis Wire EDM NC Sequence in Taper Angle Format
  
To Create a 4-Axis Wire EDM NC Sequence in Taper Angle Format
To create a 4-Axis Wire EDM NC sequence with CL data output in XYZ / IJK format or using the STAN statement, follow the procedure below.
1. Click Wire EDM > Taper Angle. The SEQ SETUP menu with options selected for 4 Axis Wire EDM appears.
2. On the MACH AUX menu, click Taper Angle > 4 Axis > Done.
3. If you have specified the tool, site, and coordinate systems at setup time, you can proceed directly to Step 5.
Select the desired options and click Done. The system will start the user interface for all selected options in turn.
4. Click Customize and interactively specify the tool path. You can automatically create Rough, Finish, and Detach motions referencing the same contour.
5. On the NC SEQUENCE menu, click Play Path to verify the tool path generated by the system.
6. Click Done Seq or Next Seq when satisfied.