Manufacturing > Tool Motions for NC Sequences > To Create a Follow Curve Tool Motion
  
To Create a Follow Curve Tool Motion
1. On the Trajectory, Manual Cycle, or Face tab, select Follow Curve in the Tool Motions list. The Follow Curve dialog box opens.
2. Select the curve or sketch for the toolpath. If a curve does not exist, you can sketch a curve using the Sketch tool () or the Datum Curve tool ().
3. Click to flip the direction of the tool motion or to keep the direction of the tool motion as is, respectively.
4. Click Parameters to edit the tool motion parameters using the Edit Parameters dialog box.
5. Click OK to create the follow curve motion, or click Cancel to quit.