Features
|
Lite
|
Standard
|
Advanced
|
Number of supported electrically active components (connectors, terminals, and splices)
|
5
|
20
|
> 20
|
Number of supported wires, bundles, cables, and overbraids
|
20
|
50
|
> 50
|
Supports overbraid
|
![]() |
||
Supports cosmetic features: tapes, tie-wraps, markers, and heat shrink tubing
|
Supports tapes, tie-wraps, and markers only.
|
![]() |
|
In-line components (axial)
|
splices
|
![]() |
![]() |
In-line components (radial)
|
![]() |
||
Dual in-line components
|
![]() |
||
Supports sub harnesses
|
![]() |
||
Closed loop topography
|
![]() Single |
![]() |
|
Branch bundle feature
|
![]() Single |
![]() |
|
Automatic Bend to Fit feature
|
![]() |
![]() |
![]() |
Automatically attempts to resolve branch overlaps in 2D representation
|
![]() |
||
Auto-generation and annotation of the 2D representation dimensions
|
![]() |
![]() |
![]() |
Supports standard drawing sheet sizes: A0 to A4 and F to A
|
A0/F
|
![]() |
![]() |
User defined drawing templates
|
![]() |
![]() |
|
Supports variable drawing sheet that expands horizontally to fit the harness drawing
|
![]() |
||
Map user defined parameter for BOM description
|
![]() |
![]() |
![]() |
Map user defined parameter for spool part number
|
![]() |
![]() |
|
Map user defined parameter for connector seal
|
![]() |
||
Auto-generation and placement of the bill of materials
|
![]() Electrically active components |
Generates bill of materials with consolidated spool usage.
|
Generates bill of materials with consolidated spool usage, wedges, and cavity seals.
|
Auto-generation and placement of the Wire List table
|
![]() |
![]() |
![]() |
Auto-generation and placement of the Connector Cavity tables
|
Contains the following parts:
• Housing
• Terminals
• Wires
|
Contains the following parts:
• Housing
• Terminals
• Seals
• Wires
• Rear view of the connector
|
|
Auto-pagination of BOM and Wire List tables on standard drawing sheets
|
![]() |
![]() |
|
Auto placement of 3D assembly view
|
![]() |
![]() |
|
Auto-generation of component views
|
![]() |
||
Automatic ballooning of items
|
![]() |
||
Export Wire Cutting List in the CSV file format
|
![]() |
![]() |
|
Export BOM in the CSV file format
|
![]() |
||
DXF format for output
|
![]() |
||
Automatic design-rule checking
|
![]() |
||
Editing of the 2D harness manufacturing drawing
|
![]() |
![]() |
![]() |
Associativity of connectors to 2D harness
|
![]() |
![]() |
![]() |
Component flexible parameter preservation
|
![]() |
||
Backshells and boots associativity
|
![]() |
||
Grommet handling
|
![]() |
![]() |
|
Manifolds, T, Y; and transition boots
|
![]() |
||
Alignment of flattened harness to attached component geometry
|
![]() |
||
Splice handling improved
|
![]() |
![]() |
![]() |
Bulk item handling
|
![]() |
![]() |
|
Multiple extraction for markers
|
![]() |
![]() |
|
Configuration file for HMX drawing output
|
![]() |
||
Reference designator and BOM Balloon improved positioning
|
Reference Designator only
|
Reference Designator only
|
![]() |
Pagination of cavity tables
|
![]() |
![]() |
|
Bundle termination on entry port
|
![]() |
||
Parallel splice processing
|
![]() |
||
Table customization for user defined parameters
|
![]() |
||
Table wire length manipulation
|
![]() |
||
Windchill Compatibility
|
![]() |
||
Front face dimensioning scheme option
|
![]() |
||
Output file control options
|
![]() |