ECAD > Working With ECAD Assemblies > Setting Up Board Design > Working With Board Properties > Tool Settings > To Change Bend Settings
  
To Change Bend Settings
1. In an open board part, click File > Prepare > Model Properties. The Model Properties dialog box opens.
2. Under Board, click change in the Bends line. The Preferences dialog box opens.
3. Click Bends.
4. To specify a different value for the bend radius, type a new value in the box, or select a value from the list.
5. Set the bend dimension location:
Inside—Dimensions the radius from the inside surface of the bend.
Outside—Dimensions the radius from the outside surface of the bend.
6. To specify a different bend angle, type a new value in the box or select a value from the list.
7. Click OK and regenerate the model.