Cabling > Adding Cabling Cosmetic Features > To Create a Marker
  
To Create a Marker
1. Click Marker.
2. At the prompt, type a new marker name. The marker name can have a maximum of 31 characters.
3. Select a point or location on the segment of a cable or wire to use as the center for the marker on the cable. The marker length is displayed at the prompt.
◦ Click to accept the default length. The marker expanded diameter value is displayed at the prompt.
◦ Type the new marker length, if you want to change the existing length.
◦ Click to cancel the operation. The marker expanded diameter value is displayed at the prompt.
4. Click to accept the existing value or type a new marker expanded diameter value. The marker reduced diameter value is displayed at the prompt.
5. Click to accept the existing value or type a new marker reduced diameter value. The cable cosmetic is created successfully.
 
* The thickness of the marker is assigned automatically. You can modify the expanded diameter, reduced diameter, length, and position along the selected cable with the Modify > Mod Dim commands.