Cabling > Using Bundles > To Align or Unalign Bundles
  
To Align or Unalign Bundles
1. Click the arrow next to Bundle and then click Bundle Alignment. The Bundle Alignment dialog box opens.
2. Select the Locations at which you want to change the alignment. The selected locations are displayed. You can select only those locations at which the bundles end or start. Select one of the following to align or unalign bundles:
3. Select one of the following options:
Align—Aligns the bundles at the specified location.
Unalign—Unaligns the bundles at the specified location.
4. Click Apply to continue aligning or unaligning bundles at new locations or OK to close the Bundle Alignment dialog box.
5. Click Model > .
 
* The align_cable_bundles configuration file option is used to align or unalign bundles but applies to bundle locations and not the bundles themselves. The default value is Yes.
When creating locations, if the align_cable_bundles configuration file option is set to Yes, bundles at such locations are aligned by default. But if this option is set to No, bundles at such locations are unaligned by default.
Use this procedure to align bundles at locations created with the align_cable_bundles option set to No or to unalign bundles at locations created with the align_cable_bundles option set to Yes.