Detailed Drawings > Working with the Drawing Table > Using BOM Balloons > To Change the Balloon Leader Attachment Point and Style
  
To Change the Balloon Leader Attachment Point and Style
1. Select the balloon to change.
2. Right-click and click Edit Attachment on the shortcut menu.
3. Specify an attachment location and a leader style to the balloon. For example, to change an arrowhead pointing to an edge to a clear dot attached to a surface,
a. Click On Surface and Dot on the menu
b. Click the surface to which you want to attach the dot. The leader end is changed to a dot and relocated to the surface area.
4. Click Done/Return to complete.
 
• For a Flat repeat region, you can move the BOM balloon for a part or subassembly on the top level, only to another part or subassembly on the top level if the region is specified as No Duplicates.
• For a No Dup/Level region, you can move the BOM balloon for a part or subassembly only to a part or subassembly having the same parent assembly.
• For a Recursive/No Duplicate region, you can move the BOM balloon for a part or subassembly anywhere in the model where the same part or subassembly is used.
• For a Duplicates region, you cannot move the BOM balloon for a part or subassembly to any other component.