To Create Cosmetic Offset Lines
2. Click
![](../../../assembly/asm/images/explode_line_create.png)
, or click
Explode Lines and then click
![](../../../assembly/asm/images/explode_line_create.png)
. The
Cosmetic Offset Line dialog box opens with the
Reference 1 box activated.
3. Select a point on a surface or an edge for the first endpoint. The Reference 2 box is activated.
4. Select a point on a surface or an edge on another component for the second endpoint.
5. Click Apply. The line is created and the Reference 1 box is reactivated.
6. Repeat steps 3–5 for each offset line that you want to create.
7. Click Close.