Using Bearing Load in Creo Ansys Simulation
User Interface Location: Click > > .
Release: Creo Parametric 9.0.0.0
Watch videos that demonstrate this enhancement:
What is the benefit of this enhancement?
You can now use bearing loads in Creo Ansys Simulation.
You can apply force as a pin/hole connection.
The distribution is automatic over half of the cylinder, in the direction specified as a parabolic function.
You can define the load by Magnitude and direction or Directional components.
Axial components are not allowed. If required, you need to apply a separate force. Only radial load components are allowed.
You can apply bearing loads to shared references, and the results are additive. Bearing loads should be applied per hole instead of several holes.
This enhancement enables you to apply a load to simulate a pin/hole connection. The resulting load is closer to the real-world case than a simple force load.
Additional Information
Tips: | None. |
Limitations: | No known limitations. |
Does this replace existing functionality? | No. |
Configuration option associated with this functionality: | None. |