Profile Passes and Custom Support for 3 Axis HSM Rough and HSM Rest Rough
User Interface Location: In a manufacturing assembly, create or edit a sequence, and then set the ROUGH_OPTION parameter as ROUGH_AND_PROF.
Release: Creo Parametric 9.0.0.0
Watch a video that demonstrates this enhancement:
What is the benefit of this enhancement?
You can now create profile passes on the 3 axis HSM Rough and Rest Rough sequences. This enhancement also supports the cutter compensation on the profile passes.
Previously, profile passes were not created for the CONSTANT_LOAD and TYPE_SPIRAL scan types in 3 axis HSM Rough and Rest Rough. This enhancement eliminates that limitation.
This enhancement brings consistency across roughing and rest-roughing sequences.
Additional Information
Tips: | You need to define the LEAD_RADIUS and TANGENT_LEAD_STEP parameters to control the Lead-in and Lead-out for the profile passes and CUTCOM (ON / OFF) and CUTCOM_REGISTER parameters for cutter compensation. The PROF_STOCK_ALLOW parameter must have a value. The default value hyphen (-) indicates that the value is unset. |
Limitations: | No known limitations. |
Does this replace existing functionality? | No. |
Configuration option associated with this functionality: | None. |