Cabin Radiation with Convection and Radiation: Exercise 2—Defining Physics Modules
Physics specifications are handled in Creo Flow Analysis using modules.
1. In the Flow Analysis Tree, right-click Physics and select Select Physical Models or click 
Physics Module. The Physical Model Selection dialog box opens.
Physics Module. The Physical Model Selection dialog box opens.2. Under Available Modules, select Turbulence and click 
.
.3. Under Available Modules, select Radiation and click
4. Click Close to close the Physical Model Selection dialog box.
Specifying Flow Module Conditions
1. In the Flow Analysis Tree, under Physics select Flow.
2. In the Model tab, set the following values for the options listed:
◦ Converge Criterion — 1e-06
◦ Gravity force — Yes
▪ Z— -9.8 m/s2
Specifying Radiation Module Conditions
1. In the Flow Analysis Tree, under Physics select Radiation.
2. In the Model tab, set the following values for the options listed:
◦ Converge Criterion — 1e-06
◦ Source — add Parallel Source
▪ Direction — -1, -0.3, -0.5
▪ Power Density — 500 W/m2