Warp > Spine Operation > About the Spine User Interface
About the Spine User Interface
The Warp tab consists of commands, tabs, and shortcut menus. Click Editing > Warp to open the Warp tab. Select geometry to warp, and click Spine to display the spine settings.
Commands
References
Geometry collector—Collects bodies, quilts, facets, or curves to warp.
Direction collector—Collects a datum plane or coordinate system to define the direction of a warp.
Tools
Spine—Shapes geometry by dragging control points on a curve.
Deformations Settings
Spine collector—Collects a curve to define the deformation.
Extend Curve—Extends the selected curve beyond the marquee.
Rectangular—Deforms using a rectangular marquee.
Radial—Deforms the geometry inward toward the spine, or outward away from the spine, only at the selected points, along a radius.
Axial—Deforms the geometry inward toward the spine, or outward away from the spine, symmetrically around the spine, along a radius.
Tabs
References
Geometry collector—Displays the bodies or the group of curves, quilts, or facet geometry to warp.
Hide Original check box—Hides the geometry of the original entity in the warp.
Copy Original check box—Copies the original entity in the warp after you have completed it.
Facet Preview check box—Displays a preview of the warped geometry within the feature. Facet Preview is unavailable if the selection consists only of facet geometry, curves, or both.
Facet Preview slider—Increases or decreases the preview quality.
Facet Preview box—Specifies a preview quality value from 0 to 100.
Direction collector—Displays the coordinate system or reference plane selected for the warp.
Spine collector—Sets the curve or edge that determines the spine deformation.
Details button—Opens the Chain dialog box containing information about the selected curve or edge.
List
Warp list—Lists each warp procedure within the current Warp feature.
—Moves the insertion arrow to the beginning of the list.
—Moves the insertion point back by one item.
—Moves the insertion point forward by one item.
—Moves the insertion arrow to the end of the list.
—Deletes the selected warp procedure from the list.
Options
Contains the point, tangent, and scale options.
Point list—Sets behavior of selected points.
Free—Points move freely.
H/V (Ctrl+Alt)—Points move only in a horizontal or vertical direction.
Normal (Alt)—Points move normal to a selected face or plane.
Tangent list—Specifies behavior of a tangent when you drag it.
Free—Tangent moves freely.
Length (Alt)—Only tangent length changes.
Angle (Ctrl+Alt)—Only tangent angle changes.
Scale box—Sets a value for control point displacement.
—Exports the parameter value for editing outside of Warp.
Marquee
First and Second (when Rectangular is selected)
—Exports the parameter value for editing outside of Warp.
Sets the Start and End of the marquee in the first and second directions normal to the spine as a percentage of the original marquee (when Marquee Size method is Proportional).
Sets the Start and Length of the marquee in the first and second directions normal to the spine as a value (when Marquee Size method is Absolute).
Sets the Start Offset and End Offset of the marquee in the first and second directions normal to the spine as a value offset from the marquee start or end (when Marquee Size method is Offset).
Radial and Depth (when Radial is selected)
—Exports the parameter value for editing outside of Warp.
Sets the Start and End of the marquee radial to the spine in one direction, and at a depth in the second, as a percentage of the original marquee (when Marquee Size method is Proportional).
Sets the Start and Length of the marquee radial to the spine in one direction, and at a depth in the second, as a value (when Marquee Size method is Absolute).
Sets the Start Offset and End Offset of the marquee radial to the spine in one direction, and at a depth in the second, as a value offset from the marquee start or end (when Marquee Size method is Offset).
Radial (when Axial is selected)
—Exports the parameter value for editing outside of Warp.
Sets the Start and End of the marquee along the spine as a percentage of the original marquee (when Marquee Size method is Proportional).
Sets the Start and Length of the marquee along the spine as a value (when Marquee Size method is Absolute).
Sets the Start Offset and End Offset of the marquee along the spine as a value offset from the marquee start or end (when Marquee Size method is Offset).
Marquee Size list—Sets the method used to determine marquee size.
Absolute—Sets the marquee size using absolute dimensions.
Offset—Sets the marquee size using distance from the marquee start or end.
Proportional—Sets the marquee size as a percentage relative to the original.
Reset—Resets the marquee to the default size and location.
Properties
Name box—Sets a name for a Warp feature.
—Displays detailed component information in a browser.
Shortcut Menus
Right-click the graphics window to access shortcut menu commands.
Geometry Collector—Activates the Geometry collector.
Direction Collector—Activates the Direction collector.
Spine Collector—Activates the Spine collector.
Deactivate Collector—Dectivates the selected collector.
Clear—Removes data from the selected collector.
Use Boundary Tangents—Maintains tighter tangency control at boundaries.
Transform—Activates the Transform warp type.
Warp—Activates the Warp warp type.
Spine—Activates the Spine warp type.
Stretch—Activates the Stretch warp type.
Bend—Activates the Bend warp type.
Twist—Activates the Twist warp type.
Sculpt—Activates the Sculpt warp type.
Was this helpful?