Creo Ansys Simulation > Running Simulation Studies > Running Simulation Studies—Creo Ansys Simulation
Running Simulation Studies—Creo Ansys Simulation
Structural Simulation Studies
To run a simulation study perform the following steps:
1. Define the minimum required simulation objects as follows:
For a structural simulation study—Define the following minimum requirements :
Loads
Constraints
Material Assignment
For a modal simulation study—Define the following minimum requirements :
Constraints
Material Assignment
For a thermal simulation study—Define the following minimum requirements :
Boundary Conditions
Thermal Loads
Material Assignments
2. Define any other optional simulation objects such as connections, idealizations, surface regions.
3. Click Ansys Simulation > Run > Study Check to run a preprocessor check on the model. Correct issues if any.
4. Click Ansys Simulation > Run to run the study.
5. Monitor the simulation run using the Process Manager.
Was this helpful?