Sheetmetal > Setting Up Sheetmetal Design > To Customize the Sheetmetal Design Environment
To Customize the Sheetmetal Design Environment
1. Click File > Options. The Creo Parametric Options dialog box opens.
2. Click Sheetmetal. The Sheetmetal area opens.
3. To set directory paths for sheetmetal-specific libraries, type a path name in the relevant box, or click Browse to browse to a library folder.
4. To use sheetmetal parameters or the Sheetmetal Preferences dialog box to set the default values of tool settings and to update features automatically when parameter values are changed, click the Associate tool settings check box.
5. To show or hide corner relief notes for subsequent sessions, click or clear the Show corner relief notes check box.
6. To define if bends are automatically added to geometry with sharp edges when creating walls, click or clear the Add bends on sharp edges check box.
7. To show or hide bend notes for subsequent sessions, click or clear the Show bend notes check box.
8. To customize the bend note symbols or change the bend note element order, type a different value in the box.
* 
To reapply default bend note symbol and bend note element order settings, type default in the box.
9. Click OK to apply the new settings.
* 
You can also set a configuration option for each of the above settings.
Was this helpful?