To Check Waterline Circuits
1. On the Mold or Cast tab, click 
Mold Analysis. The Mold Analysis dialog box opens.
Mold Analysis. The Mold Analysis dialog box opens.2. Under Type, select Waterlines, and under > , select a part.
3. Under Waterline, select one of the options:
◦ All Waterlines
◦ Select Waterlines
◦ Select Surfaces
4. Under Clearance, click and enter a minimum clearance for the waterline.
5. Click Compute. The results appear in the Results box.
Red color indicates that the water line is closer than the clearance; green color indicates that the water line is farther than the clearance. In multibody parts, the surfaces or edges of bodies are considered in computation.