Creo Manikin > Placing a Manikin > To Replace One Manikin with Another
To Replace One Manikin with Another
1. Select the manikin to replace from the Model Tree or the graphics window.
2. Right-click and choose Replace on the shortcut menu. The Replace dialog box opens.
3. Under Replace By, click Interchange.
4. Browse to the manikin library and select a replacement manikin.
5. Click OK. The manikin is replaced.
* 
If the manikin_replace_keep_posture configuration option is set to yes, the new manikin appears in the same posture and its internal behavior remains the same as the manikin it replaces.
A smaller manikin may not be able to reach the target as set for the original manikin. You may need to add more flexibility to the new manikin.
Was this helpful?