To Move a Surface Finish Symbol
You can move a surface finish symbol with a leader by selecting it and dragging it to the required location.
Click and drag the surface finish symbol with the four-way dragger (
) to the required location, retaining the attachment point.
) to the required location, retaining the attachment point.Select a surface finish symbol, and press SHIFT, to convert the four-way dragger to a way-way dragger (
). This allows adjusting the length of the elbow without changing the leader position and elbow intersection point.
). This allows adjusting the length of the elbow without changing the leader position and elbow intersection point.Additionally, the secondary draggers are available at the leader attachment point and the elbow end of the surface finish symbol. You can drag these draggers to change the position of the leader of the surface finish symbol.
Alternatively, you can use the Move command to move the surface finish symbol. This command is supported for the following placement types:
• Placed with a leader
• Free placed on an annotation plane
• Free placed on a Flat to screen plane
To move the surface finish symbol using the Move, follow these steps:
1. Select the surface finish symbol from the model tree or in the graphics window. Right-click the surface finish and select Move from the shortcut menu.
2. Move the pointer to the new location and, click to place the surface finish symbol in the desired location, or middle-click to cancel the operation.