To Create an Offset Cross Section
1. Open a part.
2. On the View tab, click the arrow next to Section.
3. Click Offset. The Section tab opens.
4. Select an existing sketch. A cross section is automatically created.
Alternatively, to create a sketch perform the following steps:
a. Click the arrow next to Datum on the Section tab. A list opens.
b. Click . The section tool pauses and the Sketch dialog box opens.
c. Select a datum plane and click Sketch. The Sketch tab opens.
d. Use the Sketch tab to draw a sketch.
e. Click to save the sketch and close the Sketch tab.
f. On the Section tab, click to resume the Section tool.
If the newly created sketch can be used as a reference for the current section, it is automatically selected and a section is created.
* 
The Sketch collector on the Section tab displays the name of the sketch used to create the cross section.
5. You can extend the cross section to one side of the sketch or both sides of the sketch using on the Section tab. The cross section is extended normal to the sketch reference.
— Extends the cross section to the first side of the sketch.
none — Does not extend the sketch reference to the first side.
— Extends the cross section to the second side of the sketch.
none — Does not extend the sketch reference to the second side.
6. Click to change the clipping direction.
7. Click or middle-click. The section is added to the Model Tree.
You can enter a name for the cross-section and specify the hatch format for the new object on the Properties tab.
Was this helpful?