Fundamentals > Working with the Model > Search Tool > To Search for Objects Referenced by an Intent Object
To Search for Objects Referenced by an Intent Object
1. Click or click Tools > Find. The Search Tool:1 dialog box opens.
2. Click the Attributes tab if it is not selected by default.
3. To search for the objects referenced by an intent object, use one of the following combinations for Look for and Look by. The items that satisfy the specified rule and criteria are listed under items found in the Search Tool:1 dialog box only after you click Find Now.
Look for
Look by
items found
Datum
Intent Datum
Lists all the datums referenced by the intent datums in the model
Datum plane
Intent Datum Plane
Lists all the planes referenced by the intent datum Planes in the model
Axis
Intent Datum Axis
Lists all the axes referenced by the intent datum axes satisfying the specified rule and criteria.
Point
Intent Datum Point
Lists all the points referenced by the intent datum points in the model
Coordinate System
Intent Datum Csys
Lists all the coordinate systems referenced by the intent datum csys’ in the model
Edge
Intent Chain
Lists all the edges in the model referenced by intent chains
Surface
Intent Surface
Lists all the surfaces in the model referenced by intent surfaces
Quilt
Intent Surface
Lists all the quilts in the model referenced by intent surfaces
Quilt
Intent Chain
Lists all the quilts in the model referenced by intent chains
4. Under Rule, set a rule to search for objects referenced by the intent objects or build a query.
* 
You can use the Name rule to search for the intent objects, that is, search by intent name. The intent name is unique and is used to define the intent object and how Creo Parametric features reference the intent object. The intent name is not the same as the name of the datum reference feature that defines it.
5. Under Criteria, specify the criteria to search for the required intent object.
6. Click Find Now. The items are listed under items found in the Search Tool:1 dialog box. The results are also highlighted in the graphics window.
7. If required, click to transfer items from items found to items selected.
8. Click Close.
Was this helpful?