Setting Board Parameters
Board-specific parameters, their description, and required parameter values follow:
 |
Bend allowance in a file of imported legacy parameters is calculated using the last value of the factor type specified for the part.
|
|
Parameter
|
Description
|
Value
|
|---|---|---|
|
BOARD_THICKNESS
|
Sets the thickness of the board.
|
Numeric value
|
|
BOARD_BEND_ALLOW_FACTOR
|
Sets the value of Y factor or K factor.
|
Numeric value
|
|
BOARD_BEND_ALLOW_FACTOR_TYPE
|
Sets Y factor or K factor as the bend allowance factor type.
|
Y Factor
K Factor
|
|
BOARD_UPDATE_BEND_ALLOWANCE_INFO
|
Makes other bend allowance parameters dependent on the assigned material.
|
Yes
No
|
|
BOARD_PART_BEND_TABLE_NAME
|
Sets the bend table assigned to calculate developed length of geometry with arcs.
|
Name
|
|
BOARD_BEND_RADIUS
|
Sets the radius of bends.
|
Numeric value
|
|
BOARD_RADIUS_SIDE
|
Defines the dimension location scheme of bends.
|
Inside
Outside
|
|
BOARD_BEND_ANGLE
|
Defines the value of bend angles.
|
Numeric value
|
|
BOARD_BEND_REL_TYPE
|
Sets the type of bend relief.
|
No Relief
Obround
Rectangular
Slit
|
|
BOARD_BEND_REL_WIDTH
|
Sets the width of bend relief.
|
Numeric value
|
|
BOARD_BEND_REL_DEPTH_TYPE
|
Sets the depth type of bend relief.
|
Blind
Tangent to Bend
Up to Bend
|
|
BOARD_BEND_REL_DEPTH
|
Defines the depth dimension of circular, rectangular, and obround bend relief.
|
Numeric value
|