Defining Report Object Names
Use the 
Setup > command to assign names to the following objects in the cabling assembly. The names must correspond to those used in the diagram so that the values in the Drawing report table match the values in the diagram. Use the User Defined parameter to display the value in a report table.
Setup > command to assign names to the following objects in the cabling assembly. The names must correspond to those used in the diagram so that the values in the Drawing report table match the values in the diagram. Use the User Defined parameter to display the value in a report table.• Cable Jacket—Sets the default name for all unshielded cable type locations in the assembly.
• Cable Shield—Sets the default name for shielded cable type locations in the assembly.
• Cable Pin—Sets the default pin name for cable type locations in the assembly.
Clicking Show Current displays the currently assigned objects.