Modifying Cross Sections
Using the Sections category on the Drawing View dialog box, you can:
Add a section to view
Remove a section from a view
Replace a section used in the view
Make the view to not show any section at all
Change a full section view to a half or local section view.
Change a total section view to an area section view, and vice versa.
You can also modify cross sections in the following ways:
Change the reference points of a local cross section in a general or projection view
Change the boundary of a local cross section in a general or projection view
Modify a partial view with a local cross section
Modify a broken view with a local cross section. Note: When you change the section properties of a broken view, the view temporarily displays as unbroken.
Remove or replace a cross section
Flip a full total cross-sectional view
Add or remove section arrows for all sections used in the view
You can delete a cross section definition from a model without having to retrieve the model. You cannot delete a cross section when it is being used by a drawing in session. Deleting a cross section in the drawing also deletes it in other drawings. To delete a section not used in any drawing in the current session, select a section view and access the Drawing View dialog box by either double-clicking, or by right-clicking and selecting Properties on the shortcut menu. Click on Sections category, in a section name list cell, select the name of the section you want to delete. Right-click and click Delete From Model.
* 
You can Include surfaces in drawing cross sections by setting the show_quilts_in_total_xsecs Detail option.
Was this helpful?