Instrumented Assemblies > Configuring Product Insight > Configuration Options for Product Insight
Configuration Options for Product Insight
auto_flex_lower_sensors
prompt*, no, yes
Defines whether flexibility on-the-fly should be applied when a subassembly with a sensor is included in the design. Flexibility allows each instance of the sensor to have different parameter values as varied items.
prompt—Prompts the user to confirm flexibility on-the-fly for each sensor inclusion.
Yes—Applies flexibility on-the-fly automatically for each sensor inclusion.
no—Does not apply flexibility on-the-fly when lower-level sensors are included in the design.
jlink_java_command
Specifies a command to start JRE from Creo. These values override the default. For example: jlink_java_command c\ProgramData\Oracle\Java\javapath\java.exe.
* 
When you select JRE for installation during Creo Parametric installation, you do not have to set this configuration option.
sensor_dataview_max_regen_tries
1*
Sets the maximum number of repetitive regenerations for each data set when using the Sensor Data View tool. The default is 1; you can increased the number when the model requires multiple regenerations to remove the needs regeneration () icon. It is not recommended to use values over 3 as it can reduce performance.
template_instrumentasm
Specifies the default instrumented assembly template. Use the full path to the file.
thingworx_connector_config_file
Sets the path to your ThingWorx configuration file.
Was this helpful?