Embedding and Extracting Assembly Components
Embedding Components
Use the procedure below to embed one or more components in an assembly.
1. Select a component in the Model Tree or graphics window, right-click and select > 
Embed. You can also click > > > Embed to embed the components.
Embed. You can also click > > > Embed to embed the components.Extracting Components
You can use the following procedure to extract an embedded component. You cannot extract a component open in a separate window.
1. Select the embedded component in the Model Tree.
2. Right-click and select > 
Extract or > > > Extract. The Extract dialog box opens.
Extract or > > > Extract. The Extract dialog box opens.3. Rename the component and click OK. The component is extracted from the assembly.
 | When the name is not in use, you can keep the same name. For example, when the original part is removed from the database after the embed operation. |