To Reassemble a Fastener
1. Select a method that follows, for the reassembly:
a. On the
Tools tab, click
Reassemble.
b. Select a component of the fastener.
or
a. Select a component of the fastener.
b. On the
Tools tab, click
Reassemble.
or
a. Select a component of the fastener.
b. On the mini toolbar click
Reassemble for a screw fastener or click
Reassemble for a dowel pin fastener. The
Select References dialog box opens.
2. Select the new references. Middle-click to accept the last reference.
3. Perform one of the following actions:
◦ Click Apply to assemble the fasteners in a loop.
◦ Click OK to assemble a single fastener.
◦ Click Cancel to close the dialog box without assembling a fastener.
| • Reassembled fasteners are logically grouped together. You can redefine grouped fasteners in one step. • Embedded components cannot be reassembled. |