To Cut Out Reference Parts from a Workpiece or a Die Block
The reference part must be cut out from a workpiece or a die block to create a volume. You can then split this volume to create the core, cavity, and other required volumes of the mold.
1. Click > 
Refpart Cutout or click > Refpart Cutout. The Refpart Cutout tab opens. If there is a single body in a workpiece or die block, it is selected by default.
Refpart Cutout or click > Refpart Cutout. The Refpart Cutout tab opens. If there is a single body in a workpiece or die block, it is selected by default. | You can open the Refpart Cutout tab while splitting a volume. While splitting a volume on the Volume Split tab, Click > to open a Refpart Cutout tab without losing the data on the Volume Split tab. |
2. Click the 
Workpiece body collector to select workpiece bodies.
Workpiece body collector to select workpiece bodies.3. Click the 
Reference parts body collector and select reference part bodies. You can right click the Workpiece bodies or Reference body collector to remove the selected bodies.
Reference parts body collector and select reference part bodies. You can right click the Workpiece bodies or Reference body collector to remove the selected bodies.4. Select the required workpiece bodies and reference part bodies. Alternatively, you can click the References tab and select the required workpiece bodies and reference part bodies.
5. On the References tab, click the Include All check box to include all workpiece bodies or reference part bodies, if required.
6. Click 
OK. The selected reference part bodies are cut out from the selected workpiece bodies.
OK. The selected reference part bodies are cut out from the selected workpiece bodies.Parent topic