Turbulent Flow in Diffuser: Exercise 2—Preparing the Mesh
A mesh is a computational grid inside, outside, or both inside and outside any closed geometry defined by a CAD surface.
Generating the Mesh
1. In the Flow Analysis Tree, select Domains.
2. In the Properties panel, Model tab, for Mesh Generation, type the following values:
Maximum Cell Size0.002
Minimum Cell Size0.0001
Cell Size on Surfaces0.0005
3. Click Generate Mesh to create the mesh for the fluid domain. If the Info dialog box opens, click Yes to convert all the units.
4. In the Post-processing group click Section View.
5. The Section 01 Properties appears. Set values for the options as listed below:
TypePlane Z
Position0
6. In the Properties panel, View tab, for Grid select Yes. The mesh for the section appears as shown the figure.
Viewing the Mesh
1. Click in the Graphics toolbar to display the style elements. Select No Hidden, Hidden Line, or Wireframe to display the mesh.
2. Clear CAD Bodies and Flow Analysis Bodies.
3. Under Domains, select DIFFUSER.
4. In the Properties panel, View tab, set Surface, Grid, and Outline to Yes. The mesh for the boundary DIFFUSER appears in the graphics window.
Est-ce que cela a été utile ?