Conception électrique > Adding Wires > To Change From-To Direction
To Change From-To Direction
1. Click Format > Conductor Direction.
2. Select the wire you want to change. To select all wires in the cable, select the cable symbol, or one of the connectors. The COND DIRECTION menu appears.
3. If you select a cable symbol, directional arrows appear showing you the to direction for each conductor.
If you select a connector, use the COND DIRECTION menu to specify all wires going to or from the selected connector.
If you select a single wire, a message, Direction of wire XXX has been flipped appears at the prompt.
You can change the from-to direction of an entire cable or individual wires within the cable.
To change the from-to direction of a wire or cable in a report table:
1. Select a wire or cable in the report table. A message, Direction of wire XXX has been flipped appears at the prompt.
2. Click Table > Repeat Region > Update Tables to update the table with the changed wire direction.
About Adding Wires
To Create a Wire Path
To Change the Wire Path
To Change the Active Spool
To Make New Wires Follow an Existing Wire
To Add a Break to a Wire
To Rename Wires
To Ch
Est-ce que cela a été utile ?