Vortex Shedding: Exercise 2—Preparing the Mesh
A mesh is a computational grid inside, outside, or both inside and outside any closed geometry defined by a CAD surface.
Generating the Mesh
1. In the Flow Analysis Tree, select Domains.
2. In the Properties panel, Model tab, for Mesh Generation, type the following values:
◦ Cell Size Specification—Absolute
◦ Maximum Cell Size — 0.1
◦ Minimum Cell Size — 0.001
◦ Cell Size on Surfaces — 0.05
3. Select Box Zone under Create a Refinement Zone drop-down list and specify the parameters under the Refine Zone Options list as follows:
◦ Cell Size—0.025
◦ First Corner— -1, -1.5, 0
◦ Diagonal Corner— 10, 1.5, 0.05
4. Click
Generate Mesh to create the mesh for the fluid domain. If the Info dialog box opens, click
Yes to convert all the units.
Viewing the Mesh
1. Click
in the Graphics toolbar to display the style elements. Select
No Hidden,
Hidden Line, or
Wireframe to display the mesh.
2. Clear
CAD Bodies.
3. Enable
Flow Analysis Bodies.
4. In the Functions panel, click
Turn on/off view properties and select the following from the list:
Hide all surfaces,
Hide all grids, and
Hide all outlines.
5. Under
Domains, select
VORTEX_SHEDDING. In the View panel, click
Show to display the selected domain.
6. In the Properties panel, View tab, set Grid, and Outline to Yes. The mesh for the domain VORTEX_SHEDDING appears in the graphics window.
Parent topic