To Tie the Orientation of Multiple Windows
You can tie the orientation of multiple result windows, so that any subsequent orientation command in one window operates on all the tied windows simultaneously. Changing the view, resizing the window, panning a window, or moving a window can be done simultaneously in all the tied windows.
This procedure assumes that you have opened multiple result windows.
1. Select a result window. Adjust it to the view, size, and position that you want.
2. Tie the orientation of multiple windows using one of the following methods:
◦ Click > 
Tie Orientation.Click the other result windows that you want to orient the same way as the current window.
Tie Orientation.Click the other result windows that you want to orient the same way as the current window.◦ Hold the SHIFT key and select the windows for which you want the same orientation.
3. The orientation of all the selected result windows is tied. The Tie Orientation button is unavailable.
Tie Orientation button is unavailable.The following commands will work simultaneously for all the tied windows:
◦ The following operations from the Orientation group and their corresponding mouse operations will work simultaneously for all the tied windows:
▪ Refit—Places the model on the screen so that you can see the entire model. A refitted model uses 80 percent of the screen.
▪ Zoom In—Increases the magnification of the selected part of the model. Move the middle mouse button backwards to zoom in to all the tied windows.
▪ Zoom Out—Decreases the magnification of the selected part of the model. Move the middle mouse button forward to zoom out of all the tied windows.
▪ Spin Center—Moves the model about the spin center. Hold down the middle mouse button to move all the tied windows about the spin center.
◦ Pan—Changes the location of the model relative to the display window by moving the frame of reference horizontally or vertically. Hold down the SHIFT key and press and move the mouse wheel to pan all the tied windows.
 | When you select multiple windows using the SHIFT key, all the commands on the Orientation dialog box accessed from > > work simultaneously on all the selected windows. However, if you have tied the orientation of multiple windows using Tie Orientation, the Orientation dialog box commands and their corresponding mouse operations, work only on the result windows that was selected first. |
4. Right-click to untie the tied result windows. The Tie Orientation button is made available. When the result windows are untied, commands in each window function independently once again.
Tie Orientation button is made available. When the result windows are untied, commands in each window function independently once again.